1. What is the other term used for reference table?
A : Dictionary
B : Biography
C : Bibliography
D : Information Table
2. Which hand book referred by machine engineer?
A : Parryʹs cheorikal
B : CRC
C : Mark standard
D : Oxford Dictionary
3. What is a hand book?
A : Model book of various works
B : Type of reference work or other collection of instruction
C : Design book of latest works
D : Dictionary of materials
4. Which standard schedule of rates to be considered for estimation?
A : Standard schedule of rates of the last year
B : Standard schedule of rates of the average of the last 10 years
C : Standard schedule of rates of the average of last 5 years
D : Standard schedule of rates of the current year
5. What is an over estimate?
A : When an estimate is exceeded to actual estimate
B : When an estimate is fell short of the actual estimate
C : When an estimate perfectly matches the actual estimate
D : No work started as per estimate
6. What is a under estimate?
A : No work started as per estimate
B : An estimate perfectly matches with actual
C : An estimate is fell short of the actual estimate
D : An estimate is exceeded the actual estimate
7. What is the term used for the method of calculating various quantities and expenditure on a particular job or process?
A : Estimation
B : Drawing
C : Specification
D : Plan
8. What is the main factor to be considered while preparing a detailed estimate?
A : Shape of material
B : Brand of the materials
C : Quantity, availability and transportation of materials
D : Location of material
9. Which authority publishes schedule of rates?
A : Individual
B : Corporate
C : Partnership firm
D : Government department
10. What is the name of a booklet, the rates of various terms are indicated?
A : Price bank
B : Price bunch
C : Price tag
D : Price catalogue
11. What is the term, for the details of materials, brand name, grade of quality, rating of current and voltage etc.?
A : Drawing
B : Specification of materials
C : Raw materials
D : Price catalogue
12. What is the use of engineering drawing?
A : For estimation of material and execution of work
B : For colourful appearance
C : For reducing the cost
D : For increasing the cost
13. What is the other term of pocket reference in engineering works?
A : Hand tool
B : Hand book
C : Good book
D : New book
14. Which one is related to estimation of work?
A : Bill of material
B : Packing
C : Information table
D : Hand book
15. What is a total cost?
A : Raw material cost only
B : Machining cost only
C : Raw materials cost and machining cost
D : Advertisement cost only
16. Who prepares the cost of estimation?
A : Operator
B : Quality Inspector
C : Estimator
D : Draughts man
17. Which one is included in machining estimation sheet?
A : Transport cost
B : Advertisement cost
C : Raw material cost
D : Tax
18. What is the minimum permissible size of aluminium wire used in estimation?
A : 1.5 sq.mm
B : 2.5 sq.mm
C : 5 sq.mm
D : 3.5 sq.mm
19. What is the minimum permissible area of conductor (U/G cable) for three and half cores cable?
A : 25 sq.mm
B : 50 sq.mm
C : 5 sq.mm
D : 100 sq.mm
20. Which one is the most reliable estimate?
A : Preliminary estimate
B : Plinth area estimate
C : Cube rate estimate
D : Detailed estimate
21. Which IE rules are to be verified on completion of wiring on any new installation?
A : IE Rules, 1956
B : IE Rules, 1960
C : IE Rules, 1961
D : IE Rules, 1967
22. What describes the detailed specification for the item of work?
A : Quality, Quantity, Workmanship, Method of execution
B : Colour
C : Tax, Transport, Overhead expenses
D : Maintenance, Stock, Cost
23. Which of the impurity in cast iron makes it hard and brittle?
A : Silicon
B : Sulphur
C : Manganese
D : Phosphorus
24. What cables are used for 132KV lines?
A : High tension
B : Super tension
C : Extra high tension
D : Extra super voltage
25. Which specification is other than general specification?
A : Brief specification
B : Bulk specification
C : Detailed specification
D : Main specification
26. What percentage of water absorbed by a good building stone?
A : Less than 10%
B : Less than 20%
C : Less than 8%
D : Less than 5%
27. What is the relative permittivity of rubber?
A : Between 2 and 3
B : Between 5 and 6
C : Between 8 and 10
D : Between 12 and 14
28. What is the weight of the iron ball has volume of 250 cc and density 7.5 gm/cc?
A : 1750 gram
B : 1875 gram
C : 1975 gram
D : 1785 gram
29. What is the weight of a rectangular block of a cost iron of 250cm X 20cm X 8cm (density of cast iron is 7.8 gm/cm³)?
A : 312 kg
B : 372 kg
C : 410 kg
D : 525 kg
30. What is the total estimation cost for making the component of 8 drilled hole dia 10 mm and 4 Numbers of M6 taps in the plate, if Rs.8/- per drilled holes and Rs.12 per drill and tap?
A : Rs.102
B : Rs.100
C : Rs.112
D : Rs.110
31. What is the estimation of milling cost of a rectangular block size 100 X 80 X60 mm, if cost of the milling is Rs.2/sq.cm?
B : Rs.752/-
C : Rs.572/-
D : Rs.960/-
32. What is the total wattage in a room if 2 tube lights of 50W rating, 2 fans of 80W rating, 2 numbers of light points of 60W rating, one fan point of 60W rating and one 3 pin socket of 100W rating?
A : 340 W
B : 440 W
C : 540 W
D : 640 W
33. What is the total labour charges for a particular wiring work completed in 2 days by one electrician and one helper.(Electrician @ ₹800/day and helper @ ₹ 400/day)
A : Rs. 2000
B : Rs. 2400
C : Rs. 3000
D : Rs. 1400
34. What is the total cost of painting of a class room including ceiling, if the size of length is 6m, breadth is 5m and height is 4m. (Painting + labour cost Rs.150/- per sq.m)
A : Rs.15000/-
B : Rs.16700/-
C : Rs.17700/-
D : Rs.18700/-
35. What is the total cost to assemble 10 personal computer systems, spares cost as given for one system: 1 TB hard disc Rs.4500/-, Intel i3 mother board Rs.7000/-, SMPS Rs.2500/-, monitor Rs.6000/-, keyboard Rs.1000/-, other material cost (Switches, USB, Cables etc.,) Rs.6500/-?
A : Rs.275000/-
B : Rs.250000/-
C : Rs.225000/-
D : Rs.265000/-
36. What is the total construction cost of a house construction area of 3000 sq.ft. (cost of construction Rs.2000/- per sq.ft including material and labour)?
A : Rs.30,000,000
B : Rs.60,00,000
C : Rs.6,00,000
D : Rs.6,000,000
37. What is the total cost of Air-conditioners installed in a college, 40 class room-each 1 Air- conditioner, Computer lab 5 Air- conditioners and conference hall 5 Air-conditioners (Cost of one air conditioner Rs.30000/- including installation)?
A : Rs.10 lakhs
B : Rs. 20 lakhs
C : Rs. 12 lakhs
D : Rs. 15 lakhs
38. What is the total estimation cost for mandrel, if density is 7.8 gm/cm² and material cost is Rs.240 kg?
B : 0.90 kg
C : 0.70 kg
D : 0.75 kg
39. What is the estimation of labour charge for making inside square of size 30 X 30 mm, if making charge Rs.500/10cm²?
B : Rs.450/-
C : Rs.350/-
D : Rs.400/-
0 Comments